ACCRABOND INC. -- POLYESTER RESIN  -- 8040-00-366-6702
<pre>=====================  Product Identification  =====================

Product ID:POLYESTER RESIN
MSDS Date:02/09/1991
FSC:8040
NIIN:00-366-6702
=== Responsible Party ===
Company Name:ACCRABOND INC.
Address:8848 HACKS CROSS ROAD
City:OLIVE BRANCH
State:MS
ZIP:38654-3827
Country:US
Info Phone Num:601-895-4480
Emergency Phone Num:601-895-4480
CAGE:5V071
=== Contractor Identification ===
Company Name:ACCRABOND INC
Address:8848 HACKS CROSS RD
Box:City:OLIVE BRANCH
State:MS
ZIP:38654-3884
Country:US
Phone:601-895-4480
CAGE:5V071

=============  Composition/Information on Ingredients  =============

Ingred Name:STYRENE, MONOMER  (SARA III)
CAS:100-42-5
RTECS #:WL3675000
Fraction by Wt: 33%
OSHA PEL:100 PPM
ACGIH TLV:S,50PPM/100STEL;9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:PHTHALIC ACID, DIMETHYL ESTER; (DIMETHYLPHTHALATE)	(SARA
    III)
CAS:131-11-3
RTECS #:TI1575000
Fraction by Wt: 58%
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:2-ETHYLHEXYL ACETATE
CAS:117-81-7
RTECS #:TI0350000
Fraction by Wt: 7%
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Ingred Name:HYDROGEN PEROXIDE  (SARA III)
CAS:7722-84-1
RTECS #:MX0900000
Fraction by Wt: 1%
OSHA PEL:1 PPM
ACGIH TLV:1 PPM

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: IRRITATION OF EYE, NOSE,
    THROAT. CHRONIC: NARCOSIS. SKIN RASH. INHAL:MAY CAUSE HEADACHE,
    DIZZINESS, NAUSEA, UNCONSCIOUSNESS. EYES:MAY CAUSE SEVERE
    IRRITATION. SKIN:MAY CAUSE MODERATE IRRITATION . INGEST:TOXIC. DO
    NOT INDUCE VOMITING.IRRITANT OF EYE, NOSE, AND THROAT. MAY CAUSE
    DEPRESSION OF THE CNS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:EXISTING RESPIRATORY CONDITIONS.

=======================  First Aid Measures  =======================

First Aid:EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES. CALL MD.
    SKIN:WASH AREA WITH SOAP AND WATER. INGEST: CALL MD IMMED. INHAL:
    REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF RESP) .

=====================  Fire Fighting Measures  =====================

Flash Point:90.0F,32.2C
Lower Limits:1.1%
Upper Limits:6.1%
Extinguishing Media:WATER FOG, DRY CHEMICAL, FOAM, CO*2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:AT ELEVATED TEMPERATURES, POLYMERIZATION
    MAY TAKE PLACE RESULTING IN VIOLENT RUPTURE OF CLOSED CONTAINERS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:DIKE AREA. ABSORB WITH CLAY OR INERT ABSORBENT
    AND PLACE IN CLOSED CONTAINER FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FROM IGNITION SOURCES &
    SUNLIGHT. STORE BELOW 75F.
Other Precautions:DO NOT WEAR CONTACT LENS. EQUIPMENT SHOULD BE
    GROUNDED DURING TRANSFER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR CARTRIDGE TYPE
    RESPIRATOR
Ventilation:REQUIRED, LOCAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE APRON AND EYE WASH STATION.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER USE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:293F,145C
Vapor Pres:<4.5
Vapor Density:3.6
Spec Gravity:1.0-1.1
Solubility in Water:VERY SLIGHT
Appearance and Odor:VISCOUS LIQUID; SWEET PUNGENT ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ACIDS, OXIDIZING AGENTS, PEROXIDES, METALIC HALIDES.
Stability Condition to Avoid:SUNLIGHT, OPEN FLAMES, PROLONGED STORAGE
    ABOVE 75F.
Hazardous Decomposition Products:CO, CO*2, OTHERS POSSIBLE.
Conditions to Avoid Polymerization:OPEN FLAMES, CONTAMINATION, EXPOSURE
    TO SUNLIGHT.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
    FEDERAL REGULATIONS .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.